Documents

Setup guide for Alpha-Link MX and MADI-AX with MadiXtreme, for 64 I/O: Click Here
The aim of this Setup Guide is to clarify the connections and settings required to maximize the I/O capabilities of an Alpha-Link MADI-SX (or MADI-AX) and MadiXtreme by the addition of an Alpha-Link MX 4-16 and an Alpha-Link MX16-4. Click here to view the Setup guide for Alpha-Link MX and MADI-AX with MadiXtreme, for 64 I/O.

XLogic IO Addendum: Click Here

XLogic Alpha-Link MX Installation and User Guide Click Here

Alpha Link MX Downloads

Firmware v2.0 updater for Mac OS X

New in Firmware v2.0
Alpha-Link MX firmware v2.0 supports 176.4 kHz and 192 kHz sample rates.

Download Alpha Link MX Firmware 2.0

Software Version: 2.0

Release Date: 17/12/12

Download Size: 5.2 MB

How to update
The firmware of your Alpha Link MX can be updated by using ALMX updater.app. Before the updater can be used the USB driver must be installed and your Alpha-Link devices need to be connected to your computer via USB.

Instructions:

• Open the Silicon Labs USB Driver.dmg (included in the ALMX 2.0 package);
• Launch and follow the instructions of the Silicon Labs VCP Driver Installer (a reboot may be required);
• Start the ALMX updater.app;
• Connect your Alpha Link MX devices (if not already done so) via USB to your computer and turn the devices ON;
• Select the device you wish to update in the device selection list of the main window;
• Select Device->Update Flash from the ALMX updater main menu;
• Do not turn OFF or disconnect the device while updating! (failing to do so may damage your Alpha-Link MX);
• If the device has been successfully updated cycle power to load the new firmware;
• If there was an error during the update please do NOT turn off the device - try to update the firmware again.

Supported Units and Operating Systems

The Alpha-Link MX firmware v2.0 updater for Mac OS X works with:

• SSL Alpha-Link MX 16-4 and 4-16
• MAC OS X 10.6 (Snow Leopard) 32-bit and 64-bit kernel
• MAC OS X 10.7 (Lion) 32-bit and 64-bit kernel
• MAC OS X 10.8 (Mountain Lion) 64-bit kernel

Firmware v2.0 updater for Windows

New in Firmware v2.0
Alpha-Link MX firmware v2.0 supports 176.4 kHz and 192 kHz sample rates.

Download Alpha Link MX Firmware 2.0

Software Version: 2.0

Release Date: 17/12/12

Download Size: 5.2 MB

How to update
The firmware of your Alpha Link MX can be updated by using SSL Alpha-Link MX Firmware v2.0.exe. During the update a USB driver will be installed and your Alpha-Link devices need to be connected to your computer via USB.

Instructions:

• Connect your SSL Alpha Link MX devices to your computer via USB and turn the devices ON;
• Open SSL Alpha-Link MX Firmware v2.0.exe;
• The Alpha-Link MX USB Driver will be installed first;
• Then the Alpha-Link Firmware updater will run.
• Select the device you wish to update using the device selection buttons;
• Click the “Start” button;
• Do not turn OFF or disconnect the device while updating! (doing so may damage your Alpha-Link MX);
• If the device has been successfully updated turn the SSL Alpha-Link MX off and then on to load the new firmware;
• If there was an error during the update please do NOT turn off the device - try to update the firmware again.

Supported Units and Operating Systems

The SSL Alpha-Link MX Firmware v2.0 updater for Windows works with:

• SSL Alpha-Link MX 16-4 and 4-16
• Windows XP 32-bit and 64-bit
• Windows Vista 32-bit and 64-bit
• Windows 7 32-bit and 64-bit

Specifications

Documents

C300 HD brochure:Click Here
C300 HD Installation Guide:Click Here
C300 HD Software Install Notes:Click Here

Documents

Music Production Tools Brochure Download
XLogic Delta-Link MADI HD Owner’s Manual Download
XLogic Delta-Link / Alpha-Link / Pro Tools Setup Guide Download

Downloads

Delta-Link MADI HD V2.00 Software - Download Size: 983 KB - Release Date: 06/11. Click here.
Delta-Link MADI HD V1.31 Software - Download Size: 664 KB Click here.
Delta-Link MADI HD V1.30 Software - Download Size: 664 KB Click here.
Delta-Link MADI HD V1.20 Software - Download Size: 605 KB Click here.

Specifications

Documents

E-Signature Channel User Guide: Download
XLogic ADC Card User Guide: Download

Documents

Installation Guides
Duende Classic Installation Guide: Click here.
Duende Mini Installation Guide: Click here.
Duende PCIe Installation Guide: Click here.

User Guide - V3 Software
Duende User Guide : Click here.

User Guide - V2 Software
Duende Classic User Guide : Click here.
Duende Mini User Guide : Click here.
Duende PCIe User Guide : Click here.

User Guide - V2 Software
Drumstrip User Guide : Click here.
X-EQ User Guide : Click here.
X-Comp User Guide : Click here.
Vocalstrip User Guide : Click here.
X-Verb Reference Guide : Click here.
X-Verb Reference Guide (Hi-res) : Click here.

Downloads V2

Duende PC Software 2.5.9 - Download Size: 24.8 MB - Release Date: 03/10/08. Click here.
Duende Mac Software 2.6.0 - Download Size: 64.1 MB - Release Date: 17/12/08. Click here.

Downloads V3

Duende PC Software 3.5.2 - Download Size: 27.6 MB - Release Date: 02/09/10. Click here.
Duende Mac Software 3.5.2 - Download Size: 68.4 MB - Release Date: 02/09/10. Click here.

Legacy Downloads

Download Legacy Duende Mac Software

Duende Mac Sofware v3.1.0 - Download Size: 48.2 MB - Release Date: 23/09/09. Click here.
Duende Mac Sofware v3.0.3 - Download Size: 49.5 MB - Release Date: 31/07/09. Click here.
Duende Mac Sofware v2.6.0 - Download Size: 64.1 MB - Release Date: 17/12/08. Click here.
Duende Mac Sofware v2.5.9 - Download Size: 63.5 MB - Release Date: 03/10/08. Click here.
Duende Mac Sofware v2.5.6 - Download Size: 60.0 MB - Release Date: 10/06/08. Click here.
Duende Mac Sofware v2.5.3 - Download Size: 60.0 MB - Release Date: 11/03/08. Click here.
Duende Mac Sofware v2.4.1 - Download Size: 42.7 MB - Release Date: 17/01/08. Click here.
Duende Mac Sofware v2.3.0 - Download Size: 43.6 MB - Release Date: 18/12/07. Click here.
Duende Mac Sofware v2.2.0 - Download Size: 40.7 MB - Release Date: 05/10/07. Click here.
Duende Mac Sofware v2.1.0 - Download Size: 37.8 MB - Release Date: 22/08/07. Click here.
Duende Mac Sofware v2.0.0 - Download Size: 39.1 MB - Release Date: 19/04/07. Click here.
Duende Mac Sofware v1.5.0 - Download Size: 32.5 MB - Release Date: 06/12/06. Click here.

Download Legacy Duende PC Software

Duende PC Sofware v3.1.0 - Download Size: 23.9 MB - Release Date: 23/09/09. Click here.
Duende PC Sofware v3.0.2 - Download Size: 24 MB - Release Date: 28/07/09. Click here.
Duende PC Sofware v2.5.9 - Download Size: 24.8 MB - Release Date: 03/10/08. Click here.
Duende PC Sofware v2.5.4 - Download Size: 24.1 MB - Release Date: 10/06/08. Click here.
Duende PC Sofware v2.5.2 - Download Size: 24.6 MB - Release Date: 11/03/08. Click here.
Duende PC Sofware v2.4.1 - Download Size: 24.7 MB - Release Date: 17/01/08. Click here.
Duende PC Sofware v2.3.0 - Download Size: 21 MB - Release Date: 18/12/07. Click here.
Duende PC Sofware v2.2.0 - Download Size: 21.1 MB - Release Date: 05/10/07. Click here.
Duende PC Sofware v2.1.0 - Download Size: 20 MB - Release Date: 22/08/07. Click here.
Duende PC Sofware v2.0.0 - Download Size: 19.2 MB - Release Date: 19/04/07. Click here.
Duende PC Sofware v1.5.0 - Download Size: 17.2 MB - Release Date: 27/11/06. Click here.

Specifications

Using Multiple Duende Units
You can run two Duende’s (any combination of Mini or PCIe) on a single computer.
The maximum channel count for a single computer is 128 channels, regardless of how many Duende units you have installed.

System Requirements

Duende supports sample rates from 44.1kHz to 96kHz. Running two FireWire Duende units requires two independent FireWire busses. Duende PCIe requires One available PCIe card slot. Duende Mini requires one available FireWire/IEEE1394 400Mbit port. Recommended VST, AudioUnit or RTAS host application*

V2.x Minimum System Requirements

PC

• Intel Pentium IV/AMD 1GHz or higher
• 512Mb of RAM (1Gb recommended)

MAC

• Apple Macintosh G4 or G5 (933MHz or higher)
• OSX 10.4.11 or higher
• 512Mb of RAM (1Gb recommended)

V3.5 Minimum System Requirements - 64 Slot Operation

PC

• 64 Slot Operation - Intel Core2 running at 2.0 GHz or higher (or comparable CPU)
• 128 Slot Operation - Intel Core2 running at 2.0 GHz or higher (or comparable CPU)
• 2GB of Ram (or higher)
• Duende V3.5 does not support Pentium or Celeron

MAC

• Intel MAC running at 1.83 GHz or higher
• 2GB of Ram (or higher)
• Duende V3.5 does not support Power PC Macs.

For best performance your system should meet the minimum requirements for your selected host application.

* SSL Soundscape V6.x and SSL Mixer V6.x, Steinberg Cubase, Nuendo and Wavelab, Apple Logic Pro, Cakewalk Sonar, Ableton Live, Digidesign Pro Tools LE and M-Powered through the use of VST-RTAS wrapper.

No documents or downloads are available for this product.

Documents

MADI-X8 Installation Guide: Click Here
MADI-X8 User Guide: Click Here

Downloads

Download MADI-X8 Mac Software

Software Version: 1.2

Release Date: 26/05/11

Download Size: 9.93 MB

Download MADI-X8 PC Software

Software Version: 1.2

Release Date: 26/05/11

Download Size: 40.0 MB

For Install Notes and System Requirements, please read the user guide.

Software Release Notes:

New Features in Version 1.2:

• Various stability and performance improvements
• Optimised algorithm for routing changes
• Fixed an issue with certain paths not being routed properly
• Fixed an issue with clearing paths not releasing destinations at all times
• Loading a setup file now restores all System Settings reliably
• Improved behaviour of restoring Factory Default settings
• Fixed a rare issue with renaming Paths, Routing Presets and Devices

The MADI-X8 Unit requires Firmware Version 1.1 or higher.

Please consult the Manual on how to check and update the firmware Version on the MADI-X8 Unit.

Legacy Downloads

MAC
MADI-X8 V1.0 Software - Download legacy MADI-X8 Software
MADI-X8 V1.1 Software - Download legacy MADI-X8 Software

PC
MADI-X8 V1.0 Software - Download legacy MADI-X8 Software
MADI-X8 V1.1 Software - Download legacy MADI-X8 Software

Specifications

Documents

MadiXtreme Installation Guide: Click Here
MadiXtreme & Alpha-Link Setup Guide: Click Here
MadiXtreme Reference Guide: Click Here

Downloads

Mac Downloads

The driver below is the latest available version of the MadiXtreme driver for OS X.

Download Mac Drivers

Software Version: 1.3

Release Date: 20/12/11

Download Size: 547 KB

New in MadiXtreme Driver V1.3

• Fully certified for Mac OSX 10.7 (Lion)
• Includes new Firmware V19 with several performance improvements
• New MADI Channel Limit (MCL) functionality, set in MadiXtreme Control Panel by clicking on the "MADI Channel Limit" Button (reboot required)

Applications for MCL:

• Pro Tools 9/10 Users. As PT 9.x and 10.x can only work with an Audio Device of max. 64 I/O Channels, setting the MCL to 32 Channels on a MadiXtreme 128 will allow this card to work
• Limit to 32 Channels for MadiXtreme 128 Users, that work in 96 Khz (no "blank" Core Audio I/O's, ie. 33-64)
• Limit to 48 Channels for Alpha-Link Users (also for Users with 2x Alpha-Link...avoids "blank" channels as well)

Supported Cards and OS's

MadiXtreme V1.3 works with one or more MadiXtreme 64 or 128 Card(s) (also with the MX4) on the following OS X Versions:

MAC OS X 10.5.x (Leopard) 32-Bit Kernel
MAC OS X 10.6.x (Snow Leopard) 32-Bit Kernel
MAC OS X 10.6.x (Snow Leopard) 64-Bit Kernel
MAC OS X 10.7x (Lion) 32-Bit Kernel
MAC OS X 10.7x (Lion) 64-Bit Kernel

MAC OS X 10.4.x (Tiger) is NOT tested and officially certified MadiXtreme V1.3.
If you want to use a tested and certified configuration on Tiger (OS X 10.4.11), please use the MadiXtreme Driver V1.1 instead.

Supported MAC Pro Configurations:
All Intel MAC Pro's (HW ID 1,1 or greater) with a minimum of 2GB Ram and 100MB HDD Space are supported.

Supported DAW's:
All Core Audio compatible applications (32 and/or 64 Bit).

Installation:

Extract the downloaded zip file.

Double Click on "SSL MadiXtreme Mac Driver V1.3".

Follow the onscreen instructions until the installation is finished.

If you are updating from a previous MadiXtreme Driver Version, please open the MadiXtreme Control Panel App after successful installation and check if the new driver could be started.

Due to certain Audio and Midi Services activated in your System (for example Soundflower, Aggregate Devices) can prevent the successful restart of the new driver, you may get an empty MadiXtreme control panel.

Please reboot your MAC in this case.

If the Control Panel starts the Firmware Updater, please follow the onscreen instructions carefully and update the firmware immediately.

This V1.3 driver requires MadiXtreme Firmware 19 to be installed on the card for full functionality.

A firmware update requires a complete Power Cycle to activate the new Firmware Image, so after the Firmware Update is finished, please power down your MAC, wait 5 seconds and power it on again.

Note on the new MADI Channel Limit (MCL) function:
In order to activate a MADI Channel Limit (eg. to work with Pro Tools 10 and a MadiXtreme 128 you need to set it to 32 Channels per MADI Head), you have to set the MCL to 32 and REBOOT your Mac when the Control Panel asks you to do so.

Legacy drivers

MadiXtreme driver for OS X - v1.2 - Download Size: 551 KB - Release Date: 05/04/10
MadiXtreme driver for OS X - v1.1 - Download Size: 549 KB - Release Date: 14/10/09
MadiXtreme driver for OS X - v1.0 - Download Size: 534 KB - Release Date: 05/11/08

PC Downloads

The driver below is the latest version of the SSL Soundscape Family Driver.

This driver will also update all other SSL Soundscape devices (MX4, MadiXtreme, Mixpander, MiXtreme, Soundscape) as well as the firmware for the Alpha-Link AX, MADI AX and MADI SX

Soundscape V6.2 now supports MadiXtreme - click here to download the software and soundcard drivers.

Download PC Drivers

Software Version: 6.2.0.0

Release Date: 31/05/12

Download Size: 1.81 MB

New In Driver 6.2.0.0

Alpha-Link Live version 2.12 firmware resolves issues seen when using Alpha-Link mic control data with a MADI-X8 router.

NOTE: Currently this 64 Bit Driver supports Soundscape V6 Streaming, ASIO 32 and ASIO 64 & WDM64.

System Requirements:

• Platform: Intel Pentium or higher and compatible CPUs
• Operating Systems: Windows XP, Vista 32 Bit or 64 Bit, Windows 7 32 Bit or 64 Bit
• Storage: 100 Mb of free hard disk space
• Internet connection for updates and registration.

Installation:

IMPORTANT:
Please follow the steps described below.

On Windows 64 Bit System it is mandatory to update/install the driver "the Microsoft Way" as described. Otherwise Windows may reset certain registry entries to a previous state on each reboot and the SSL Soundscape Devices may not work as expected.

Driver Installation on Windows 32-Bit Systems:

Exit all SSL Soundscape related software
Extract downloaded ZIP file to a temporary directory
Install the Driver located in the extracted folder and run DrvSetup.exe

Firmware Update on Madixtreme and MX4 Cards:

After the Driver has been updated open the TRack.exe Applet located in the Ssdrv Driver Folder.
Double click on each Madixtreme Device. A Firmware Updater will launch.

Please follow the On-Screen Instructions.

When done, COLD BOOT the PC (Power Down, wait 10 seconds, switch On to reboot).

Driver Installation on Windows 64-Bit Systems:

First Time Users:

• Insert the Card
• Power on your System
• Follow the onscreen Plug and Play Driver Installation and Choose Driver from the extracted Download Directory (Ssdrv_6_x_x_x)

Driver Update:

• Exit all SSL Soundscape related software
• Extract downloaded ZIP file to a temporary directory
• Go to Device Manager, locate SSL Soundscape Devices
• For each Entry (MadiXtreme Device and Mixpander) right Click, select Update Driver and point to the extracted temp directory

Notes:

• After Reboot, make sure there is a SSL Soundscape WDM Device present in the category "Sound, Video and Game Controllers"
• WDM Integration - The "easiest" option to tell Windows 7 something about System wide Audio devices (WDM) is by right clicking on the speaker icon in the task bar (close to the clock) and selecting "Properties". Now you might not see any Device in the Lists for Recording or Playback tabs, right click and select "Show deactivated Devices"... Select the SSL Cards WDM Device for Recording and Playback. You can also give it a name (ie. MX4)
• Usage - An appropriate SSL Software needs to be started before streaming is working (SSL Mixer, SSL Soundscape V6 or TRack.exe) -On a first attempt to activate the WDM Device you may need to switch the SSL Hardware to 48kHz, otherwise Windows may come up with an Error message, telling you the device is already in use
• 2GB Limit for Mixtreme and Mixpander Cards on Windows 7 - Mixtreme/Mixtreme 192 and Mixpander Cards will not properly work on Windows 7 Systems with more than 2GB of Ram installed

Firmware Update on Madixtreme and MX4 Cards:

After the Driver has been updated open the TRack.exe Applet located in the Ssdrv Driver Folder.
Double click on each Madixtreme Device. A Firmware Updater will launch.

Please follow the On-Screen Instructions.

When done, COLD BOOT the PC (Power Down, wait 10 seconds, switch On to reboot).

Legacy drivers

SSL Soundscape Family Driver 6.1.0.1 - Download Size: 1.82 MB - Release Date: 17/08/11
SSL Soundscape Family Driver 6.1.0.0 - Download Size: 1.80 MB - Release Date: 19/04/11
SSL Soundscape Family Driver 6.0.1.10 - Download Size: 1.80 MB - Release Date: 22/12/10
SSL Soundscape Family Driver 6.0.1.8 - Download Size: 1.82 MB - Release Date: 19/10/10
SSL Soundscape Family Driver 6.0.1.5 - Download Size: 1.74 MB - Release Date: 24/05/10
SSL Soundscape Family Driver 6.0.1.2 - Download Size: 1.68 MB - Release Date: 05/11/09
SSL Soundscape Family Driver 6.0.1.1 - Download Size: 1.46 MB - Release Date: 11/08/09
SSL Soundscape Family Driver 4.3.2.1 - Download Size: 1.17 MB - Release Date: 05/11/08
SSL Soundscape Family Driver 4.3.1.3 - Download Size: 1.17 MB - Release Date: 25/02/08
SSL Soundscape Family Driver 4.3.1.2 - Download Size: 1.17 MB - Release Date: 28/01/08
SSL Soundscape Family Driver 4.3.1.1 - Download Size: 1.19 MB - Release Date: 19/12/07
SSL Soundscape Family Driver 4.3.0.1 - Download Size: 1.17 MB - Release Date: 27/03/07

Documents

XLogic Mixpander Installation & Quickstart. Click here.
Soundscape Mixer 4.3 Reference Guide. Click here.

Downloads

Soundscape V6.1 download including Mixer & Driver - Click here.
SSL Soundscape Family Driver 6.2.0.0 - PC - Click here.
SSL Soundscape Family Driver 6.1.0.1 - Click here.
SSL Soundscape Family Driver 6.1.0.0 - Click here.
SSL Soundscape Family Driver 6.0.1.10 - Click here.
SSL Soundscape Family Driver 6.0.1.8 - Click here.
SSL Soundscape Family Driver 6.0.1.5 - Click here.
SSL Soundscape Family Driver 6.0.1.2 - Click here.
SSL Soundscape Family Driver 6.0.1.1 - Click here.
SSL Soundscape Family Driver 4.3.2.1 - Click here.
SSL Soundscape Family Driver 4.3.1.3 - Click here.
SSL Soundscape Family Driver 4.3.1.2 - Click here.
SSL Soundscape Family Driver 4.3.1.1 - Click here.
SSL Soundscape Family Driver 4.3.0.1 - Click here.

Documents

Multichannel Compressor User Guide: Click Here

Documents

MX4 Hardware and Driver Installation Guide. Click here.
MX4 Console Bundle Manual. Click here.
MX4 & SSL Mixer Manual. Click here.

Downloads

SSL MX4 Driver & SSL Mixer V7.2.0 - Download Size: 199 MB - Release Date: 01/02/14. Click here.
SSL MX4 Driver & SSL Mixer V7.1.0 - Download Size: 162 MB - Release Date: 06/08/13. Click here.
SSL MX4 Driver & SSL Mixer V6.2.0.0 - Download Size: 177 MB - Release Date: 10/05/12. Click here.
SSL MX4 Driver & SSL Mixer V6.1.0.0 - Download Size: 77.9 MB - Release Date: 19/04/11. Click here.
SSL MX4 Driver & SSL Mixer V6.0.1.8 - Download Size: 77.3 MB - Release Date: 19/10/10. Click here.
SSL MX4 Driver & SSL Mixer V6.0.1.5 - Download Size: 77.2 MB - Release Date: 25/05/10. Click here.
SSL MX4 Driver & SSL Mixer V6.0 - Download Size: 48.9 MB - Release Date: 12/02/09. Click here.

Documents

XLogic Mynx Owner’s ManualClick Here
X-Rack Stereo Bus Compressor Module Owner’s ManualClick Here
X-Rack Channel EQ Module Owner's ManualClick Here
X-Rack Dynamics Module Owner’s ManualClick Here
X-Rack E Series EQ Module Owner’s ManualClick Here
X-Rack E Series Dynamics Module Owner's ManualClick Here
X-Rack Stereo EQ Module Owner’s ManualClick Here
X-Rack Stereo Dynamics Module Owner's ManualClick Here
X-Rack VHD Input Module Owner's ManualClick Here
X-Rack Mic Amp Module Owner's ManualClick Here
X-Rack Four Channel Input Module Owner’s ManualClick Here
X-Rack Eight Channel Input Module Owner’s ManualClick Here
X-Rack Master Bus Module Owner’s ManualClick Here

SSL Nucleus² remains a current product. The content here relates to Nucleus V1.

Note: The latest software and drivers support package for Nucleus 1 users is V1-6-8. This can be downloaded from your registered Nucleus’ Downloads page under ‘My Products’.

Compatibility advice for Mac users

Is the Nucleus USB2 audio interface compatible with USB3 Macs?
Is the Nucleus USB2 audio interface compatible with El Captiain?

Product Videos

Using Nucleus with Pro Tools
How to set up the SSL Nucleus control surface with Avid Pro Tools... and Nucleus Pro Tools Tips & Tricks.
Download a hi-res version of this video in QuickTime format (461 MB)

Using Nucleus with Logic Pro
How to set up the SSL Nucleus control surface with Apple Logic Pro... and Nucleus Logic Tips & Tricks.
Download a hi-res version of this video in QuickTime format (543 MB)

Using Nucleus with Cubase/Nuendo
How to set up the SSL Nucleus control surface with Steinberg Cubase/Nuendo... and Nucleus Cubase/Nuendo Tips & Tricks.
Download a hi-res version of this video in QuickTime format (560 MB)

Using Nucleus with Ableton Live
How to set up the SSL Nucleus control surface with Ableton Live… and Nucleus Ableton Tips & Tricks.
Download a hi-res version of this video in QuickTime format (458 MB)

An Introduction to SSL Nucleus
A brief overview of the concepts and capabilities of Nucleus. Watch.

SSL Nucleus Tour
Damien Egan demonstrates the features of the Nucleus and explains how it works as an all-in-one control surface for your project studio.Watch.

Maintenance Videos

Nucleus Centre Card
Instructions on replacing the Nucleus centre card.Watch

Nucleus Channel Card
Instructions on replacing the Nucleus channel card.Watch

Nucleus CPU
Instructions on replacing the Nucleus CPU.Watch

Nucleus Fader Servo Card
Instructions on replacing the Nucleus fader servo card.Watch

Nucleus IO Card
Instructions on replacing the Nucleus IO card.Watch

Nucleus Mic Amp Card
Instructions on replacing the Nucleus mic amp card.Watch

Nucleus PSU
Instructions on replacing Nucleus power supplies.Watch

Documents

Nucleus User Guide: Download
Nucleus Installation Guide: Download
Nucleus Dimensions Drawing: Download
Pro Tools Standard Nucleus Profile: Download
Cubase & Nuendo Standard Nucleus Profile: Download
Logic Standard Nucleus Profile: Download
Live Standard Nucleus Profile: Download
Studio One Standard Nucleus Profile: Download
Nucleus Setup Tutorial for Reason: Download
Nucleus Setup Tutorial for Pyramix: Download
Nucleus Setup Tutorial for Reaper: Download

Pro-Convert PC

Documents

Pro-Convert User Guide - Click here.

Downloads

Pro Convert Update - 5.0.787 - Download Size: 18.2 MB - Release Date: 18/12/08. Click here.
Pro-Convert Software v5.0.769 - Download Size: 18.5 MB - Release Date: 04/03/08. Click here.
Pro-Convert Software v5.0.774 - Download Size: 17.8 MB - Release Date: 11/04/08. Click here.
Pro-Convert Software v5.0.783 - Download Size: 18.2 MB - Release Date: 03/11/08. Click here.

System Requirements

• Microsoft Windows 98, 98 SE, ME, NT 4.0 SP5, Windows 2000, Windows XP or Windows Vista (32-Bit) Note: Pro-Convert is currently not compatible with Windows Vista (64-Bit)
• 266 MHz processor or higher
• 20 MB hard-disk space for program installation
• VGA Display

Pro-Convert MAC

Documents

Pro-Convert 5.5 User Guide - Click here.

Downloads

Pro Convert Update - 5.5.2 - Download Size: 52.2 MB - Release Date: 12/04/10. Click here.

System Requirements

• Intel MAC running MAC OS X 10.5.6 or later
• 1.4GHz CPU or faster
• 100 MB hard-disk space for program installation
• Free USB Port (can also reside on a USB 2.0 Hub) for Dongle
• 1280*800 or larger Screen Resolution

Documents

SDI-MADI User Guide. Click here.

Specifications

Documents

Soundscape V 7.0 User Guide. Click here.

Downloads

PC Downloads - V7.2.0 & Mixer - Download Size: 199 MB - Release Date: 01/02/14. Click here.
SSL MX4 Driver & SSL Mixer V7.1.0 - Download Size: 162 MB - Release Date: 06/08/13. Click here.
SSL MX4 Driver & SSL Mixer V6.2.0.0 - Download Size: 177 MB - Release Date: 10/05/12. Click here.
SSL MX4 Driver & SSL Mixer V6.1.0.0 - Download Size: 77.9 MB - Release Date: 19/04/11. Click here.
SSL MX4 Driver & SSL Mixer V6.0.1.8 - Download Size: 77.3 MB - Release Date: 19/10/10. Click here.
SSL MX4 Driver & SSL Mixer V6.0.1.5 - Download Size: 77.2 MB - Release Date: 25/05/10. Click here.
SSL MX4 Driver & SSL Mixer V6.0 - Download Size: 48.9 MB - Release Date: 12/02/09. Click here.

Specifications

Recommended System Specs to build a Soundscape System

SSL Soundscape V7 and the SSL MX4 PCIe Card will run on virtually any recent Windows PC with a free PCIe Slot. It is tested on Windows 7 (32 Bit and 64 Bit) with at least 2GB of RAM. It is tested on Windows XP, Vista (32Bit and 64 Bit) and Windows 7 (32 Bit and 64 Bit) with at least 2GB of RAM.
In order to get most out of the SSL Hybrid Core Processing audio engine, we recommend you use branded and superior components for Motherboards, CPU, PSU and RAM. The more CPU Cores you have, the better the performance.

Net-Working:

If you are planning to collaborate with several Soundscape systems over a gigabit Ethernet network and some attached central storage (NAS), you should plan in some time for configuration and testing and look out for the following components:

• NAS (network attached storage): There are several vendors of RAID based NAS systems. You can configure a RAID System for performance, security or both. If you are planning a multi seat storage network, make sure, that it fits your security requirements and add a 50% buffer to your speed requirements. For instance if you need 50 MB/sec Read/Write minimum to run your projects on multiple seats, make sure that the storage is capable of 75MB/sec sustained R/W.
• Switch: Use a "managed Switch" from a well known vendor. These switches typically filter "Broadcast" data to all clients and attempt to optimise the flow of data to the single client that requested it.
• Gigabit Frame Setup: Any Switch, NAS and Network Adapter inside the PC can setup the Ethernet Frame size (Jumbo Frames). Make sure to set up the frame size to the same value on anything inside your network and give yourself some time to experiment and find the optimal settings.

Forum

Click here to access the forum.

Documents

SuperAnalogue Channel User Guide: Click Here

No documents or downloads are available for this product.

Downloads

PC Software: Click here.
MAC Software. Click here.

Documents

X-Panda Install Guide: Click Here
X-Panda UserGuide: Click Here
X-Panda Recall Sheet: Click Here
X-Panda+X-Desk Recall Sheet: Click Here

Documents

X-Patch Install Guide: Click Here
X-Patch User Guide: Click Here
X-Patch User Guide Japanese Click Here

Downloads

X-Patch Remote Software - Mac : Software Version: 1.04, Release Date: 10/06/10, Download Size: 6.31 MB - Download
X-Patch Remote Software - PC : Software Version: 1.04, Release Date: 10/06/10, Download Size: 37.5 MB - Download

Documents

X-Rack Four Channel Input Module Owner’s Manual: Click Here

Specifications

Documents

X-Rack Eight Channel Input Module Owner’s Manual: Click Here

Specifications

Documents

X-Rack Master Bus Module Owner’s Manual: Click Here

Specifications