System TThe future of audio production for broadcast


Power meets flexibility

System T offers exceptional power and flexibility with 3072 input and 3072 output connections and more than 800 active audio paths. Paths are pooled and consumed dynamically according to user configuration. Path configuration is via an intutive touch screen interface and does not interrupt audio. A pool of up to 192 mono mix busses can be used as desired within defined maximums for each bus type (providing up to 16 Master Buses, 32 Stems, 32 Auxes, 48 Mix Minus Buses and 64 Track Buses). Paths and buses can be freely configured in a range of formats up to 5.1.

Path Processing

Dedicated path processing provides 800 EQ’s, 800 Dynamics and 400 Delays. The primary signal path consists of eight process blocks that can be configured in any order using a simple drag and drop interface. These are preceded by the Path gain trim (and Input selection/conditioning on Channels). The primary Path output feeds either the panning and bus routing (channels and stems) or is available as a source in the main console signal routing (buses). Two dynamics sections can be activated in each path to facilitate cascaded Compressor/Limiter configurations. An insert send accesses additional signal processing in the System T FX Rack. The insert can also access external hardware units via the console routing.

System T FX Rack

The System T FX Rack includes a comprehensive set of SSL’s acclaimed studio quality signal processors with their own dedicated DSP pool. The selection includes additional tone and dynamic shaping, reverbs, room simulation, ambience processing, dialogue noise reduction, signal generation and analysis tools. Effects are accessible via the Path inserts, or via the console routing using the Aux and Track buses for parallel time based effects. All settings are saved in the System T Showfiles and snapshot automation.